Service
服务支持
Support
Common faults and countermeasures of gear reduction motors
Some common faults are sometimes encountered in the use of gear reduction motors. Here are some common faults and solutions:
|
Fault item |
possible reason |
Countermeasures |
|
murmur |
Bearing damage |
Replace bearings |
|
gear damage |
change gear |
|
|
Not enough oil |
increase oil |
|
|
vibration |
Bad installation |
readjust the installation |
|
The fixed base is not strong enough |
Strengthen the strength of the fixed base |
|
|
bearing damage |
Replace bearings |
|
|
bad gear |
change gear |
|
|
Poor rotor alignment |
Replace the rotor |
|
|
overheat |
Gearbox overheating |
Replace the gearbox |
|
Bad bearing oil seal |
Replace bearing oil seal |
|
|
Not enough oil |
increase oil |
|
|
overload |
Properly adjust the load |
|
|
oil spill |
Bad oil seal |
Replace oil seal |
|
Too much oil |
Adjust the amount of oil |
|
|
The action of external force makes the center of the output shaft move |
Adjust external force |
